NFPA 262 Standard Method of Test for Flame Travel and Smoke of Wires and Cables for Use in Air-Handling Spaces
NFPA 262 電線電纜的火災(zāi)和煙氣特性試驗(yàn)方法
1.1 Scope.
1.1.1* This standard shall prescribe the methodology to measure flame travel distance and optical density of smoke for insulated, jacketed, or both, electrical wires and cables and optical fiber cables that are to be installed in plenums and other spaces used to transport environmental air without being enclosed in raceways.
1.1.2 This test method shall not provide information on the fire performance of insulating materials contained in electrical or optical cables in fire conditions other than the ones specifically used in Section 6.6 of this standard, nor shall it measure the contribution of the cables to a developing fire condition.
1.1.3* Although this test uses equipment similar to that used in NFPA 255, Standard Method of Test of Surface Burning Characteristics of Building Materials, and in ASTM E 84, Standard Test Method for Surface Burning Characteristics of Building Materials, sufficient changes have been made to the chamber so that a test conducted in the apparatus used for NFPA 255 or ASTM E 84 shall not be considered identical or productive of comparable results.
1.1.4 Because this standard does not purport to address all of the safety problems associated with its use, it shall be the responsibility of the user of this standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations prior to use.
Work with the latest criteria in the 2011 NFPA 262 for accurate assessments of smoke and fire spread.
NFPA 262 Standard Method of Test for Flame Travel and Smoke of Wires and Cables for Use in Air-Handling Spaces presents a test procedure to evaluate the potential for fire spread along cables and wires housed in a plenum or other environmental space. The methodology measures both flame travel distance and optical density of smoke.
Among the changes in the 2011 edition
· Revisions to removable top cover protection
· Revisions to create consistency with ASTM E 84
· Added new methods to determine average airflow velocity
· Moved Reference Cable Test into an Annex
Invest in fire safety by following the up-to-date testing guidelines in the 2011 NFPA 262. (Softbound, 30 pp., 2011)
