EN 60695-11-20 500W火焰測試–標準名稱
EN 60695-11-20：Fire Hazard Testing - Part 11-20: Test Flames - 500 W Flame Test Methods
EN 60695-11-20：防火測試－第11-20部分：500W火焰測試方法
EN 60695-11-20 500W火焰測試–標準概述
EN 60695-11-20描述了一種由兩個小型實驗室測試程序組成的測試方法，用于比較電工產品中使用的不同材料的燃燒性能。垂直方向的桿件試樣或水平方向的板件試樣暴露在小的火焰點火源中，標稱熱功率為500w。該測試方法使用兩種測試樣品配置來對材料性能進行分類。使用矩形條形試樣來評估可燃性和燃燒行為，使用方形板試樣來評估試樣的耐燃性。本測試方法僅適用于根據IEC 60695-11-10將材料分類為V-0或V-1的材料。
Scope:
This part of IEC 60695 describes a test method consisting of two small-scale laboratory test procedures which is intended to compare the burning behaviour of different materials used in electrotechnical products. Vertically oriented bar specimens or horizontally oriented plate test specimens are exposed to a small flame ignition source with a nominal thermal power of 500 W. The test method uses two test specimen configurations to classify material performance. Rectangular bar-shaped test specimens are used to assess ignitability and burning behaviour, and square plate test specimens are used to assess the resistance of the test specimen to burn-through, as defined in 8.3.3. This test method only applies to materials that have been classified as V-0 or V-1 according to IEC 60695-11-10.
EN 60695-11-20 500W火焰測試–引用標準
IEC 60695-4:2012, Fire hazard testing-Part 4: Terminology concerning fire tests for electrotechnical products
IEC 60695-4防火測試。第4部分:電工產品防火試驗術語
IEC 60695-11-3, Fire hazard testing-Part 11-3: Test flames - 500 W flames -Apparatus and confirmational test methods
IEC 60695-11-3，防火測試。第11-3部分:火焰測試。500w火焰。試驗裝置和確認試驗方法
IEC 60695-11-10, Fire hazard testing-Part 11-10: Test flames - 50 W horizontal and vertica flame test methods
IEC 60695-11-10防火測試。第11-10部分:火焰測試。50w水平和垂直火焰試驗方法
